Whole-Home Rewiring in Greater Raleigh

The cost to rewire a full house safely typically runs $8,000–$15,000 for an average home. Actual pricing depends most on home size, how accessible the wiring paths are, and whether a panel or service upgrade is needed to meet current code and grounding. Most homes are completed in about 3–10 days. We plan projects around local code requirements for homes in the Angier area. If your home has aluminum branch circuits, a trained AlumiConn or CO/ALR retrofit can be a safer, more cost‑effective alternative to a full rewire. Access and wall construction often drive labor more than homeowners expect, especially in older houses. You’ll receive upfront pricing after an in‑home evaluation; what we quote is what you pay.

Cost drivers we check during the evaluation:

• Larger square footage and higher circuit count
• Limited attic/crawl access or plaster/lath walls
• Panel/service upgrades or added whole‑home surge protection
• Presence of knob‑and‑tube, cloth, aluminum, or ungrounded wiring

Schedule an on‑site assessment to confirm scope, firm pricing, and whether repair or retrofit can safely meet your needs.

Updated: 2026-06-12

Need help in Angier, NC? Call 9194733849 or book online.

Replacing knob-and-tube wiring typically costs $8,000–$15,000 for an average home, with final pricing confirmed after an on-site inspection. Costs are driven by your home’s size, how accessible the wiring is, and whether a panel upgrade or added grounding is needed. Most projects take 3–10 days, and we replace old wiring with modern Romex to meet current code and safety needs. We routinely replace knob-and-tube in older Triangle homes, including projects in and around Pittsboro. A seasoned tech can often phase work to keep key areas powered so daily life can continue. If breakers trip, lights flicker, or two-prong outlets are everywhere, a full rewire is usually the safer long-term fix.

Schedule an evaluation to receive an upfront, itemized quote and a clear scope for your home.

Updated: 2026-07-04

Need help in Pittsboro, NC? Call 9194733849 or book online.

House rewiring typically costs $2,000–$4,000 per square foot based on our published guidance. Most variation comes from the size of the home and how easily we can reach circuits without major demolition. For broader context, we also publish whole‑home totals from $20,000–$75,000, and an “average home” example of $8,000–$15,000 depending on scope. We routinely perform rewires across the Smithfield region and coordinate permits, inspections, and utility disconnects as needed. In older homes, we often find mixed circuits that add tracing time before a single wire is pulled. Final pricing is confirmed after an on‑site evaluation.

Expect higher or lower pricing when:

• A service or panel upgrade (often to 200 amps) is required.
• Cloth‑covered or aluminum wiring needs full replacement and grounding updates.
• Plaster walls or tight attics/crawls limit routing access.
• You add dedicated circuits for EV charging, hot tubs, HVAC, or workshops.

If you’re comparing options, ask for a per‑room scope and whether panel, grounding, and surge protection are included.

Updated: 2026-10-01

Need help in Smithfield, NC? Call 9194733849 or book online. David was very upfront about costs. — Melanie F.

Knob-and-tube wiring replacement typically costs $8,000–$15,000 for an average home. Most of the price comes from replacing old branch circuits so the system meets today’s code and grounding standards. We provide upfront pricing after evaluating your home and scope. Our team performs knob-and-tube replacements for many homes in the Angier area.

Key factors that change the price:

• Home size and number of circuits
• How accessible the walls, attic, and crawlspace are
• Whether a panel upgrade or added circuits are needed
• Typical duration: 3–10 days

If you notice burning smells or warm outlets, stop using that circuit and schedule an evaluation right away.

Updated: 2026-08-21

Need help in Angier, NC? Call 9194733849 or book online. "They completely rewired my home and brought it up to modern code... They are very professional and I will use them again when needed." — Doug Kelly.